Stucco Installation in Melbourne, FL
Stucco That Actually Holds Up in Florida
Hear from Our Customers
Melbourne Stucco Contractor You Can Count On
Most stucco problems don’t start with the material. They start with how it’s installed.
When stucco goes on right, you get an exterior that breathes, sheds water, and stands up to Florida’s weather without trapping moisture behind your walls. That means no mold creeping through your insulation. No wood rot eating away at your framing. No insurance headaches because someone cut corners during the install.
You also get better energy efficiency. Stucco installed correctly can cut your cooling costs by up to 30% compared to vinyl siding, because it actually insulates instead of just covering your house. And in Melbourne, where your AC runs most of the year, that adds up fast.
The difference between a stucco job that lasts 50 years and one that fails in five comes down to prep work, material choice, and knowing how to handle Florida’s climate. We’ve been doing this for over 20 years across Central Florida, and we’ve seen what happens when contractors skip steps or use the wrong system for the conditions here.
Stucco Companies Near Me in Melbourne
CF Stucco and Painting has been handling stucco installations in Melbourne and across Central Florida for more than two decades. We’re not new to this, and we’re not learning on your house.
We’ve worked on everything from older Melbourne homes built in the ’90s that need full re-stucco jobs to new construction in growing neighborhoods like Viera West and Suntree. We know the building codes. We know the climate. And we know what fails here and why.
Our Google rating is 5.0, and our overall rating across platforms sits at 4.6 from 145 reviews. That’s not because we’re the cheapest option in Brevard County. It’s because we show up when we say we will, we communicate clearly, and we don’t leave your property looking like a construction zone when we’re done.
How Stucco Installation Works in Melbourne, FL
First, we come out and look at your property. We’re checking your substrate, your existing exterior condition, and any moisture issues that need addressing before stucco ever goes on. If there’s a problem, we tell you. If your framing is compromised or your sheathing is rotted, stucco won’t fix that—it’ll just hide it until it gets worse.
Next, we prep the surface. This means installing the right weather-resistant barrier, adding weep screeds at the bottom so water can escape, and making sure every penetration around windows and doors is flashed correctly. This step is where most stucco failures start, so we don’t rush it.
Then we apply the scratch coat, brown coat, and finish coat in the right sequence with the right cure times. We’re not slapping it on in one day and calling it done. Stucco needs time to cure between layers, especially in Florida’s humidity.
After the final coat, we clean up the site, walk you through the finished work, and make sure you know how to maintain it. We’re not gone the second the job’s done. If you have questions later, we’re a phone call away.
Ready to get started?
Stucco Contractor Near Me Serving Melbourne
When we install stucco on your Melbourne home, you’re getting a complete system designed for Florida’s climate—not just a coat of plaster thrown on your walls.
That includes a water-resistant barrier that’s rated for high-wind zones and heavy rain. Melbourne gets hit with tropical storms and hurricanes, and your exterior needs to be built for that. We use barriers that meet Florida Building Code requirements and won’t delaminate when things get wet.
You’re also getting proper flashing around every window, door, and roof line. This is where water sneaks in on most homes, and it’s where we spend extra time making sure everything overlaps correctly and sheds water away from your structure. We’ve seen too many homes in Brevard County with stucco that looks fine on the surface but has thousands of dollars in hidden water damage because the flashing was done wrong or skipped entirely.
The stucco itself is applied in three coats with the right thickness and texture for durability and appearance. We’re not thinning it out to save material costs. We’re not rushing the cure time. And we’re not using bargain-bin products that crack in the Florida sun after two years.
How long does stucco installation take on a typical Melbourne home?
For an average single-family home in Melbourne, a full stucco installation usually takes one to two weeks, depending on the size of the house and the weather. That includes prep work, applying all three coats with proper cure time between each layer, and final cleanup.
We can’t rush the cure times, especially in Florida’s humidity. Each coat needs time to set before the next one goes on, or you’ll end up with cracking and adhesion problems down the road. If a contractor tells you they can do your whole house in three days, that’s a red flag.
Weather plays a role too. If we get heavy rain or extreme heat during the job, we may need to adjust the schedule to make sure each layer cures correctly. We’d rather take an extra day and do it right than push through and leave you with a subpar result.
Will stucco crack in Florida's heat and humidity?
Hairline cracks can happen with any stucco, but large cracks are usually a sign of improper installation, not a problem with the material itself. When stucco is applied correctly with the right base layers and proper expansion joints, it holds up fine in Florida’s climate.
The key is using a system that allows the stucco to move slightly as your house expands and contracts with temperature changes. That means control joints in the right places, proper reinforcement mesh, and a base coat that’s thick enough to handle stress without transferring it to the finish coat.
We also make sure the substrate is solid before we start. If you’re putting stucco over damaged sheathing or rotted framing, it’s going to crack no matter how good the stucco work is. That’s why we inspect everything first and fix underlying issues before we move forward. Most stucco problems in Melbourne aren’t about the stucco—they’re about what’s underneath it.
How much does stucco installation cost in Melbourne, FL?
Stucco installation in Melbourne typically runs between $6 and $9 per square foot for a standard three-coat system, but that can vary depending on your home’s size, the condition of the existing exterior, and whether we need to do any repairs before we start.
If your house needs sheathing replaced or has moisture damage that needs remediation, that adds to the cost. Same goes for homes with a lot of architectural detail, multiple stories, or difficult access. A straightforward ranch-style home will cost less per square foot than a two-story with complex rooflines and decorative trim.
We give you a clear estimate upfront with no surprises. If we find something during the job that changes the scope, we talk to you before we proceed. You’ll know what you’re paying for and why. We’re not the cheapest stucco contractor in Brevard County, but we’re also not the ones you’ll be calling back in three years to fix water damage because the job was done wrong the first time.
Can you install stucco over my existing siding?
It depends on what you have now and what condition it’s in. In some cases, yes—we can install stucco over certain types of existing siding if the substrate is solid and there’s no moisture damage. In other cases, the old siding needs to come off first.
If you’ve got vinyl or aluminum siding and the sheathing underneath is in good shape, we can often work with that. But if there’s wood siding that’s rotted, or if we find evidence of water intrusion, we’re pulling it off and addressing the problem before any stucco goes on. Covering up damage doesn’t make it go away—it just makes it worse and more expensive to fix later.
We’ll inspect your exterior and give you an honest assessment. If we can save you money by working with what’s there, we will. If we can’t do it right without removing the old material, we’ll tell you that too. The goal is an installation that lasts, not one that looks good for a year and then fails.
Does stucco need maintenance after it's installed?
Stucco is low-maintenance compared to wood siding or other exteriors, but it’s not zero-maintenance. You should inspect it once or twice a year for cracks, check that caulking around windows and doors is still sealed, and wash it down occasionally to remove dirt and mildew.
Small hairline cracks can be patched before they turn into bigger problems. If you see any cracks wider than a quarter-inch, or if you notice water stains or soft spots, call us. Those are signs that water might be getting behind the stucco, and that needs to be addressed quickly before it damages your framing or insulation.
In Melbourne’s climate, mildew and algae can grow on stucco, especially on north-facing walls or areas that don’t get much sun. A gentle wash with a garden hose or a soft brush and mild detergent once a year keeps it looking clean. Don’t use a pressure washer—too much pressure can damage the finish or force water into places it shouldn’t go.
What's the difference between one-coat and three-coat stucco systems?
A three-coat system is the traditional method: a scratch coat for adhesion, a brown coat for strength and thickness, and a finish coat for appearance. It’s thicker, more durable, and better suited for Florida’s climate and weather conditions. That’s what we install on most homes in Melbourne.
One-coat systems use a single base coat applied over foam insulation board or cement board, then a finish coat on top. They’re faster and cheaper, but they’re also thinner and less forgiving if there’s any movement in the substrate. They can work fine in some situations, but they’re not what we’d recommend for a home in a high-wind, high-moisture area like Brevard County.
The three-coat system gives you more protection, better impact resistance, and a longer lifespan. It costs more upfront, but it’s the difference between a stucco job that lasts 50 years and one that starts having problems in 10. If you’re making the investment in stucco, it’s worth doing the full system and doing it right.
Local Resources
Useful Links
Other Services we provide in Melbourne